IR100
Infrared
Laser
Laser
IR100100L
IR100
- Temperature range up to 1800°C
- Attenuation up to 95% (2 color)
- Laser target pointer
- 2 Alarms board
- Signal processing
- Remote Control Display with settings
Technical specifications
Temperature/measure field
From 700°C to 1800°C
Precision
±0,5% or ±1°C
Repeatability
±0,2% or ±1°C
Optical resolution
Up to 40:1
Response time
From 5mS to 10sec
Room temperature
Up to 250°C without cooling
Storage
From -20°C to +85°C
Spectral band
1μm or 2 color
Emissivity/Transmittance
Adjustable 0.100 - 1.000 ( Slope 0.8 to 1.2 )
Work temperature
Sensing head : -20 to +250°C; 0 to +85°C / 10-95% RH non condensing; (70°C with laser on)
Vibrations & Shocks
IEC 68-2-6: 3G. 11-200Hz, any axis; IEC 68-2-27: 50G, 11mS, any axis
Degree of protection
IP65 (NEMA-4)
Analog output
0/4-20mA (500ohm), 0-5/10V, Tc J,K, alarm
Digital output
Relay : 2x60V DC / 42 V ACeff; 0,4A; optically isolated; USB, RS232, RS485, CAN, Profibus, Ethernet
Power supply
8..36 V DC
Functions
Peak hold, valley hold, average, extended hold, threshold and hysteresis.
Description
IRtech Radiamatic IR60 and IR100 are fiber optic infrared thermometers with split architecture using a passive measuring head connected with separated electronics module through fiber.
The 2 color IR100, due to ratio principle is insensitive to dust or partial target quite indipendent from emissivity. The standard remote control display make easy to startup and maintenance. All the settings, including emissivity, are available on panel and can be modified with built-in keyboard.
The laser aiming simplify the alignment of the thermometer on the target identifying the real area of measurement. The laser can be powered and switched on directly by keyboard or remotely by digital interface.
The temperature of the measuring head is monitored switching off the laser if over 70°C to avoid any damage.
The modular capability allow to install various digital interface and a board with two relays of alarms. This will avoid to install an additional panel meter.
The powerful signal processor allow to adapt the measurement to the requirement of the application.
Analog input: external emissivity, ambient temperature compensation, trigger.
